Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    327
    Rep Power
    37

    C75 ADJ 7.6 screen

    Does anybody know how to get to the side 1/side 2 alignment adjustment screen for ADJ 7.6 on a Xerox C75. I can't find it in System Registration. I have a picture of it in the edoc, but cannot find it.

    Thanks.

  2. #2
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    Dallas/Fort Worh, TX
    Posts
    487
    Rep Power
    27

    Re: C75 ADJ 7.6 screen

    1. Power on the copier/printer, while holding down the 0 (zero), 1, and 3 buttons

  3. #3
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    327
    Rep Power
    37

    Re: C75 ADJ 7.6 screen

    That just calibrates the touchscreen. What I need to know is how to navigate to the screen shown in figure 2 of the ADJ7.6 in the edoc "Side 1 / Side 2 Registration"

    Thanks.

  4. #4
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    Dallas/Fort Worh, TX
    Posts
    487
    Rep Power
    27

    Re: C75 ADJ 7.6 screen

    That's not a screen shot of the UI, it's a pic of the printout you make when making the adjustment. Unfortunately its not that easy.

    You will need 2 things: A metric ruler at least the length of an 11x17 sheet and lots of patience. Make the measurements and input them where the Edoc states.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here