All of a sudden between print jobs this Xerox 560 went from printing very well to printing very very light.
No error codes.
It does the same if it is a file sent via the rip or a copy done from the glass.
Help
All of a sudden between print jobs this Xerox 560 went from printing very well to printing very very light.
No error codes.
It does the same if it is a file sent via the rip or a copy done from the glass.
Help
Check the bias connector on the 2nd BTR assy
Where do I find that on this machine?
Thanks
Panic stop the machine when copy goes light and check how the image on belt looks.
If the image on belt is ok the you have transfer problem and check 2ndBTR assy.
If on belt same faint, light image probably you have problems with High Voltage Power Source and need to check it and it electrical connections or 24 volts from LVPS= Low Voltage ....
Bookmarks