If it was working fine, why were you there?
If it was working fine, why were you there?
I'm just asking.......if you've got dirty prints, you should be able to figure this out since your a Senior Tech.............I'm done. No more replies.
your statement doesn't make shit for sense:
The machine was working well, but I added it and removed all its consumers as well as the mother card and I add them cloth cloth and removed déveloper unite
And the installation of the back of this problem
no wonder people are getting tired of trying to help.. clearly IF you are a tech you're at the bottom of the barrel.
GET THE DAMN MANUAL ...RTFM...LEARN the process of image formation.
I've seen that exact banding pattern on a new AltaLink C8055 (all 4 colours though), turned out to be a bad HVPS DEV PWB, so i would try the equivalent board for this printer.
For the white streaks running through clean your trimmer bar of the K dev tank or replace it.
Bookmarks