Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 25
Xerox DC 242 Toner drop down
Hi All.
I had to replace the magenta dev unit after the seal failed and blocked the dev unit ever since then I have been getting spots of magenta drop down scattered across the page - I thought this might have been due to a build up of dev/toner from the split seal but after running over 500 pages through its still there. I have cleaned all the surfaces that I can see and pulled the transfer belt out and cleaned up and under.
Does any one know if this will pass with more copies passed or am I missing something obvious?
Thanks
Chris
-
Senior Tech
100+ Posts
- Rep Power
- 25
Re: Xerox DC 242 Toner drop down
Never mind - It seems to be related to the new drum I installed at the same time - swapped the drum for the old one and the problem disappeared within a page or 2 and has not reappeared in over 500 that I have ran so far.
I will send that drum back under warranty
Cheers
Chris
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks