after installing a new system software on 5655 with flash disk (Altboot)
- display incomplete phase install
- fuser and drum not compatible
- foreign interface device (fid) is not detected
after installing a new system software on 5655 with flash disk (Altboot)
- display incomplete phase install
- fuser and drum not compatible
- foreign interface device (fid) is not detected
Last edited by walidcharifi; 11-24-2018 at 06:46 PM.
I download firmware a Xerox site
25.54.53.000
The battery nvm is dead .... After 03 months I reload software !!!!!!!
Yes in official Xerox site
5655 SBC controler
Page de configuration before failed
https://drive.google.com/folderview?id=1dLhsEdC9Lyn6u6oKtfdjh5j6M6fQuSRe
Replace software module not only yellow battery
Bookmarks