Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 37
xerox 3001
i think the probem is the amount of oil on the fuser roller,we oil the pad under the fabric guide and it seem to help alot,so i am thing the problem is the oil donor roll is not getting enought oil on the roller even tought is
brand new.The ends seem to be oiled more than the middle sections so i don't know if i don't have something right or not.
-
Technician
50+ Posts
- Rep Power
- 32
fuser temperature
you can change fuser temperature in "service mode" enter 4 "fuser temperature" and you can change the number from 1(low) to 9 (high). success
-
Senior Tech
100+ Posts
- Rep Power
- 0
i need pws for new xerox copiers
i need pws for new xerox copiers
-
Technician
- Rep Power
- 0
Take the springs out off the donor roll so the oil can disperse to the fuser. The springs tend to bind and restrict the oil flow.
-
Hi I am also looking for a part for this machine can anyone let me know where i can get a heated roller for the Xerox 3001 which suppliers sell parts for these machines would be a great help. it can be anywhere in the world as long as they are for real. thanks Peter
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks