Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 250+ Posts
    Xerox WorkCentre 7835 does not exit energy saver mode


    Join Date
    Feb 2010
    Posts
    329
    Rep Power
    33

    Xerox WorkCentre 7835 does not exit energy saver mode

    Machine is on 073.010.068.33100 software that was clean installed using altboot. All machine functions work fine, but when it enters energy saver mode, it is unable to exit it. Pressing the green button either doesn't do anything or causes the machine to reboot.
    I've changed SBC, LVPS and LVPS fan (since it isn't spinning - it isn't now either even though I have replaced both LVPS and fan), and also the hard drive.

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Sep 2010
    Posts
    76
    Rep Power
    28

    Re: Xerox WorkCentre 7835 does not exit energy saver mode

    Quote Originally Posted by Detonation View Post
    Machine is on 073.010.068.33100 software that was clean installed using altboot. All machine functions work fine, but when it enters energy saver mode, it is unable to exit it. Pressing the green button either doesn't do anything or causes the machine to reboot.
    I've changed SBC, LVPS and LVPS fan (since it isn't spinning - it isn't now either even though I have replaced both LVPS and fan), and also the hard drive.
    Just turn off energy saver, I’ve don’t that plenty of times. I can get you nvms if needed.


    Sent from my iPhone using Tapatalk

  3. #3
    Senior Tech 250+ Posts
    Xerox WorkCentre 7835 does not exit energy saver mode


    Join Date
    Feb 2010
    Posts
    329
    Rep Power
    33

    Re: Xerox WorkCentre 7835 does not exit energy saver mode

    Not an option I’m afraid. Machine is as good as new and customer expects it to be fully functional.

  4. #4
    Senior Tech 250+ Posts
    Xerox WorkCentre 7835 does not exit energy saver mode


    Join Date
    Feb 2010
    Posts
    329
    Rep Power
    33

    Re: Xerox WorkCentre 7835 does not exit energy saver mode

    Bump, since I haven't been able to figure out the problem just yet...

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jun 2015
    Location
    Nottingham, UK
    Posts
    74
    Rep Power
    18

    Re: Xerox WorkCentre 7835 does not exit energy saver mode

    Sounds like loss of +5VDC standby power which is normally cured by replacing the LVPS which you have already done.

    I'd order up another LVPS and before replacing it troubleshoot for shorts in +5VDC standby power, something is pulling it down. Could possibly be worth replacing the UI assembly also.

  6. #6
    Senior Tech 250+ Posts
    Xerox WorkCentre 7835 does not exit energy saver mode


    Join Date
    Feb 2010
    Posts
    329
    Rep Power
    33

    Re: Xerox WorkCentre 7835 does not exit energy saver mode

    Thanks Richard will try this Monday.

  7. #7
    Senior Tech 250+ Posts
    Xerox WorkCentre 7835 does not exit energy saver mode


    Join Date
    Feb 2010
    Posts
    329
    Rep Power
    33

    Re: Xerox WorkCentre 7835 does not exit energy saver mode

    Replaced the LVPS with a known good one and the UI assy as well, but no luck. Will search for shorts in the 5V circuit.

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Jun 2015
    Location
    Nottingham, UK
    Posts
    74
    Rep Power
    18

    Re: Xerox WorkCentre 7835 does not exit energy saver mode

    Anything of note pop up in the fault history once you power device back on after this fault occurs?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here