Xerox 700 error code 041-326

[Kwaku01]

Hi,

I'm getting error code 041-326 on my xerox 700. Your help would greatly be appreciated!

Thanks in advance!
J

[InterfaceP]

Blown fuse on the power supply. Rear bottom left

[Kwaku01]

Blown fuse on the power supply. Rear bottom left

Thanks! I've placed an order for fuse:

Xerox DC 700 PWBA-PHD 960k28872

Détails sur Xerox DC 700 PWBA-PHD 960k28872

[Kwaku01]

Blown fuse on the power supply. Rear bottom left

We've replaced the blown F3 fuse and replaced the PRE_REGI_MOT thinking that was the
cause but the f3 fuse blew up again. We don't know what to do now. The last option is to replace the MCU PWB board but before
we do that, we want to find out if anyone with similar issue managed to fix the problem and how they did it.

Thanks
J

[Milo Wilson]

Check wiring from pre-reg motor to that board to see if anything is pinched or shorting to the frame.

[kado]

We've replaced the blown F3 fuse and replaced the PRE_REGI_MOT thinking that was the
cause but the f3 fuse blew up again. We don't know what to do now. The last option is to replace the MCU PWB board but before
we do that, we want to find out if anyone with similar issue managed to fix the problem and how they did it.

Thanks
J

I am sure you lost your +24volt on LVPS...check the supply come from with AVO meter and fix it. iam fammiliar with this model.

pls reach me on Whatsapp +62 813 3333 8918

Regards

[Kwaku01]

I am sure you lost your +24volt on LVPS...check the supply come from with AVO meter and fix it. iam fammiliar with this model.

pls reach me on Whatsapp +62 813 3333 8918

Regards

Thanks mate! We've lost +24volt on LVPS. However, we've bridged 24 power supply from elsewhere. Anyway, will try and reach you on whatsapp. Cheers!