Replace Xerox 700 IOT PWB BOARD, 960k28862 with XEROX J75 PWBA IOTD, 960k68231

[Kwaku01]

I'm not sure where to locate the Platen Interlock Switch. Please see attached image...

I double checked the IOTD at P437 and the voltage reading was 1.56v instead of 24v. What could be the cause and how do I fix it? Please help anyone!

[Kwaku01]

Even the iot driver pwb from C75 looks the same as 700 may be it is not.
The RAP from edoc say to replace iot driver pwb after you already have replaced the iot exit motor.
Part number for IOTD= 960K28863 from edoc parts list.
The 41-202 in dc 131 is indeed in 'High' status ?
May be there are others faults. How about nvm init ?

Finally, I found the cause of the error 041-344, 041-345, LVPS MAIN!!! The 24V power supply to the IOT board was bridged and the error code went and after the machine was on for about 30sec a new error code came on, 0412-313. Which I think also point to the same cause, LVPS MAIN.
Please, do you know anywhere I can get a secondhand part?

Xerox 700 AC Power Supply
105E17901
Thanks for your help!

Jeff