Hi i have a xerox 700 jamming just half way from the machine into the finisher with error 077-115
when photocoping the copy is coming out okey but when i command a print job it ll jam half way into the finisher what could be the problem
Hi i have a xerox 700 jamming just half way from the machine into the finisher with error 077-115
when photocoping the copy is coming out okey but when i command a print job it ll jam half way into the finisher what could be the problem
This is associated with the CIS, its located under the metal bracket on the pre-registration assembly, just before the 2nd BTR. Remove the bracket and make sure the connector is secure and not broken. Also preform the CIS set-up cycle in Diagnostics > MAX SET-UP and see if it gives you an "OK" or a "NG".
Assuming you did the procedure correctly, I would replace the CIS.
Bookmarks