Altalink 80XX Series special Altboot method

[hnami]

Try with usb port on back side of machine

I tried but it didn't work, it just writes the message”powering up don’t push powet again “but it doesn't boot, it doesn't restart either

[xcopytech]

Try pws altboot

[hnami]

Why do most visitors send emails and request swup.usb files?
The said method is very easy for those who don't have special altboot files, I will explain it again briefly.
1.try download sd card and hdd image by available links in forum
2.restore images to your sd card and hdd with “active disk image”software.
3.download firmware full version by avaliable links in forum
4.make forced upgrade with dlm file and FORCED_UPGRADE and DISABLE_DATA_BACKUP files.
As simple as said
good luck

[hnami]

hello to friends
is everything ok?
Does anyone have any questions?

[hnami]

Thanks for sharing that diagram! Now, as for restoring a corrupt SD, I have personally not been able just yet to clone a SD from another AltaLink.


Sent from my iPhone using Tapatalk

hi my ferind
to clone sd card or restoring sd image use "ACTIVE DISK IMAGE" software i put the link in forum that is free to install
also you dont neet to anoder sd card i puted link of sd card images on forum
goodluck

[hnami]

active disk image software download link
https://dl2.soft98.ir/soft/a/Active....rar?1709505477

[janik123]

What have you done?
Install full software with special altboot?

I did but the machine didnt take it and after inicializating software it restarted, then black screen appear u can wait 1 hour and nothing will happen. sd card was flashed with c8055 software, new hdd installed, my guess is could it be faulty pwb?

[xcopytech]

Did you flash SD card with new file from xerox or with image from another machine?
What software level have you tried to install?

[hnami]

I did but the machine didnt take it and after inicializating software it restarted, then black screen appear u can wait 1 hour and nothing will happen. sd card was flashed with c8055 software, new hdd installed, my guess is could it be faulty pwb?

try replace hdd and perform forced upgrade

[hnami]

I did but the machine didnt take it and after inicializating software it restarted, then black screen appear u can wait 1 hour and nothing will happen. sd card was flashed with c8055 software, new hdd installed, my guess is could it be faulty pwb?

i so have de same problem check cpu cooling