paper setings is ok, but still the paper jam. Dc250 only done 10k copies?????
Clean the anti-static brush or remove if not cleanable. Try to set the screw setting gap of the stripper blade down by 2mm. There is no adjustment of this baffle in edoc, item 8.2.7 but this may help
Clean the anti-static brush or remove if not cleanable. Try to set the screw setting gap of the stripper blade down by 2mm. There is no adjustment of this baffle in edoc, item 8.2.7 but this may help
Clean the anti-static brush or remove if not cleanable. Try to set the screw setting gap of the stripper blade down by 2mm. There is no adjustment of this baffle in edoc, item 8.2.7 but this may help
is it same adjustment applied to tarzan ?now i adj it 15mm as default ...what's your adjustment ?
Bookmarks