Hi, I have a Docucolor 12, seems that the Hard Disk of the Fiery is damaged, when I turn it on, the hard disk only makes a click, click, click, sound and nothing happens, what can I do?
Best Regards,
Hi, I have a Docucolor 12, seems that the Hard Disk of the Fiery is damaged, when I turn it on, the hard disk only makes a click, click, click, sound and nothing happens, what can I do?
Best Regards,
you can put a new IDE hard disk 40 gb or so and i presume you don't have the system software.if you are having X12 ver 1.5 then i could give you the installation CD's otherwise post your fiery model and hopefully some one could get you the software
Thanks both for your answers, I have a Cobra Fiery.
I tried to recover the information with a software a didnīt worked.
i could send you the system software of cobra, do u have a cd drive on your cobra?
hi ,
can you please help me how we can make a diffrence between fieryx12 and cobra ?
i want to install fiery v1.1 system software but i don't know about the proccedure how to install and how many cds are required for this task ?
i have only one cd of system software in mdf format, i try to boot with this but didn't get any response.
If u can get a ghost image ver1.5(meaning,someone has built a fiery 12 system with all the drivers,configurations already done) for u. It takes disk 1/2 to get it up and going. Of course that your fiery 12 has all the standard factory parts. The hdd can be bought(new) and the size doesnt matter. It will format the patition with the ghost image. I have done this in the past and not knowing what the heck I was doing and it work. Good luck!
antonio check p.m
Bookmarks