Workcentre Pro45 network controller problem

[Kenny]

I will try to get in via a web browser. However i don't have a copy of the system software for this machine and to date have not had to perform a software reload on one. Do you know where i could find the system software and how easy is it to reinstall the NC.

Many thanks in advance

[XeroxTechBrazil]

You have a private message re: loading the IOT software.

[ac3243]

I have a WCP 45 with HD problems. I don't have the files to install the software to a new HD. Can I just clone a working 3.98.50 drive from a working WCP 35? Is there a better firmware to put on?

[tech9]

hi , does it print a configuration report ?

[ac3243]

The one with the HD problem does not print a configuration report. The one I can clone works great.

[xcopytech]

Only way which I know is with xerox pws and altboot software and firmware for wc 35/45/55 machines.

Tried a couple times to clone hdd but did not have success.

[tech9]

i have the software levels but you need a pws to load.

[ac3243]

What firmware versions can you load with a PWS. Since I don't have the network controller working right now, it's a little hard to tell what version it was running when it quite. If I start with a new drive, what can versions can I load?

[xcopytech]

with altboot you can download any version

[Milo Wilson]

I would load 3.97.20.00 to start, then you can upgrade through the internet to 3.98.50