-
Field Supervisor
500+ Posts
- Rep Power
- 9
-
Field Supervisor
500+ Posts
- Rep Power
- 13
Check for loose or disconnected components on the Main PWB.
Check all dc voltages from Power Supply PS1 to the MCU
If OK, replace Main Controller PWB
-
Trusted Tech
50+ Posts
- Rep Power
- 2
check power supply 25vdc PL 1.1B item 9.
-
KM Dealer
- Rep Power
- 3
If all the leds are on, right from powered on, it means controller is not passing the self test. I hope you have already checked the RAMs.
-
Field Supervisor
500+ Posts
- Rep Power
- 9
this machine is located in bombay.
-
Is that good?
-
Field Supervisor
500+ Posts
- Rep Power
- 9
250 miles from AjitN's location
-
-
KM Dealer
- Rep Power
- 3
Who R u.
I know most od the engrs in Mumbai who manages 8830.
Ypu r some body not from the lot.
Please replay.
-
KM Dealer
- Rep Power
- 3
sorry my typo mistake.
who r u?????
u r not 8830 engr.
please get in touch with engr or proper knowledge persone like shaileshbhai
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks