Originally Posted by
livewire
To enter diagnostics mode:
Press and hold the 0 key for 5 seconds, then press the Start button (while still holding down the 0 key).
The Access Number screen will appear, Enter 6789 and press Confirm.
Press the Log In/Out button on the UI (Control panel button from your picture).
The System Settings screen appears.
Select System Settings.
Select Common Settings.
Select Maintenance/Diagnostics.
Select NVM Initialization.
Enter 762-315 and reset to 0.
Great video. Do new video with my instructions to enter diagnostics.
Press and hold the 0 button...
Bookmarks