Xerox 242 Service Access Code

[Naomi Lynn]

Does anyone know the access code for a 242 Docucolour to reset faultcode 093-314

[TechMate]

Does anyone know the access code for a 242 Docucolour to reset faultcode 093-314

Reset NVM 762-312 to 0

[Naomi Lynn]

How do we get to NVM 762-312 on the control panel to reset this

[Naomi Lynn]

Please Please Help

[TechMate]

How do we get to NVM 762-312 on the control panel to reset this

go to service mode. hold down 0 (zero) for 5 secs, don't release then press start. enter password 6789 -confirm. press login/out button. press systems settings/systems settings/common settings/ maintenance diagnostics/nvm read write. enter the nvm value- read, change the value to 0 and save. then exit or close until the machine will reboot by itself (dont turn off the machine using power switch)

[Naomi Lynn]

go to service mode. hold down 0 (zero) for 5 secs, don't release then press start. enter password 6789 -confirm. press login/out button. press systems settings/systems settings/common settings/ maintenance diagnostics/nvm read write. enter the nvm value- read, change the value to 0 and save. then exit or close until the machine will reboot by itself (dont turn off the machine using power switch)

This all worked atreat so far - cheers

[Naomi Lynn]

I have this new error code 093-317 - is this related to another colour on the machine

[xcopytech]

black toner dispense fault

[TribalBen]

go to service mode. hold down 0 (zero) for 5 secs, don't release then press start. enter password 6789 -confirm. press login/out button. press systems settings/systems settings/common settings/ maintenance diagnostics/nvm read write. enter the nvm value- read, change the value to 0 and save. then exit or close until the machine will reboot by itself (dont turn off the machine using power switch)

Will this work for the 240 as well?