DC2060 Image Quality Issues - Help Please!

[xcopytech]

no replace metering blade or donor roll assy

[davidj7]

agrees with xcopy.btw didnt you change most of the stuff in the fuser assembly few days back.Also check if there is enough oil in the tank and pump is working .

[GusG]

On Saturday I realised that the ghost imaging was only on the particular stock I was using for that job which was art paper gloss 115 gsm. Bond 80, art paper gloss and matt 135, art board 250 etc all went through the machine fine. And after printing a job on any of the other stocks I could put a couple hundred sheets of the art gloss 115 through before the problem reoccurred so that's how I finished that job.
I guess it was just bad quality paper.