Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jun 2009
    Posts
    132
    Rep Power
    31

    Xerox wcp 133/ Jamming Tray 2

    Greeting,

    I am having a problem with a Xerox Workcentre Pro 133 Jamming just before registration on tray 2 only. All other trays work fine including by-pass.

    any help would be appreciated.

    Regards
    mdm

  2. #2
    Senior Tech 100+ Posts tech9's Avatar
    Join Date
    Apr 2009
    Location
    london
    Posts
    219
    Rep Power
    33
    Any fault codes ?

  3. #3
    Virtechs
    Guest
    Check the Tray 2 feeder assy especially feed motors and feed rollers as well. If they are ok, remove the bypass/msi assy and check the take away roller condition.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here