DC12 not printing from Bypass tray

[GusG]

Hi. My newly installed (but not new) DC12 (with Fiery X12 RIP) won't print to the bypass tray (tray 5) yet it did so yesterday. I get a message on the RIP saying "Selected paper size is not available" despite the tray setup on the printer and the printer driver matching.

Any clues to solving this is highly appreciated, thanks in advance.

[TzALbg]

Loosen connector PJ-416 on the main IOT PWB
Reseat the connector

[GusG]

Thanks, I'll try that

[hachetman]

	Quote:			Originally Posted by GusG
	Hi. My newly installed (but not new) DC12 (with Fiery X12 RIP) won't print to the bypass tray (tray 5) yet it did so yesterday. I get a message on the RIP saying "Selected paper size is not available" despite the tray setup on the printer and the printer driver matching. Any clues to solving this is highly appreciated, thanks in advance.

I remember a little about this try going to mother x's web page and download the lastest driver to match your os don't use the one that comes on the cd suppiled with the copier

[GusG]

	Quote:			Originally Posted by TzALbg
	Loosen connector PJ-416 on the main IOT PWB Reseat the connector

	Quote:			Originally Posted by TzALbg
	try going to mother x's web page and download the lastest driver

I haven't tried working on the connector but I realised that the bybass works just fine when I copy. I've tried all the drivers that I've found for Windows XP on X's site plus the one that was on the fiery itself. No joy.
I've got the X12 v. 1.5 SP2 with the following patches installed:
1-IT20F
1-K32ZJ
1-i7sg8
Could it be needing a patch like the composite patch (over 400MB)?

[davidj7]

are u able to change the settings to Tray 5 bypass in command workstation and does it work then?

[xcopytech]

do not instal composite patch
composite patch is for version 1.5 not for 1.5 sp2

ver 1.5 sp2 is newer and have composite patch in installation files.

[GusG]

	Quote:			Originally Posted by davidj7
	are u able to change the settings to Tray 5 bypass in command workstation and does it work then?

Yes, I've tried that and it still says "Selected paper size is not available"

[GusG]

	Quote:			Originally Posted by xcopytech
	do not instal composite patch composite patch is for version 1.5 not for 1.5 sp2 ver 1.5 sp2 is newer and have composite patch in installation files.

Thanks, I'll stop the download right away

[davidj7]

are you able to select 12*18 on tray 5 in copy mode . you might have to activate the extended paper size option in the service mode