-
Junior Member
- Rep Power
- 0
PWS won't connect
I can get pws to connect to the M24 any ideas??
Thanks
D
-
Field Supervisor
500+ Posts
- Rep Power
- 10
are you trying to connect via USB to serial or serial cable
-
Junior Member
- Rep Power
- 0
-
Senior Tech
100+ Posts
- Rep Power
- 0
Are you sure you are trying to connect via COM1?
-
Field Supervisor
500+ Posts
- Rep Power
- 10
check the com port number of your usb to serial cable and match it to the com port of pws
-
Senior Tech
100+ Posts
- Rep Power
- 4
It should definitely be set to com1
-
Senior Tech
100+ Posts
- Rep Power
- 5
Check Version of Diagnostic Tool
Check the version of your diagnostic tool if forcing the USB> serial converter to Com 1 doesn't do it. Latest for EPC is 3.10
-
Senior Tech
100+ Posts
- Rep Power
- 4
usb to serial must connect to com 1 .
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks