Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: xerox 5328

  1. #1
    University lecturer
    Join Date
    Mar 2007
    Posts
    15
    Rep Power
    22

    xerox 5328

    I have cured the heater problem but don't know how to reset the u9 code.........any ideas?



  2. #2
    Senior Tech 100+ Posts suckis's Avatar
    Join Date
    Dec 2006
    Location
    Thessaloniki
    Posts
    166
    Rep Power
    0
    Does exposure lamp illuminates?

    ! RTFM !
    My site: http://www.e-club.gr/

  3. #3
    University lecturer
    Join Date
    Mar 2007
    Posts
    15
    Rep Power
    22
    yes it does illuminate.


  4. #4
    Technician
    Join Date
    Mar 2007
    Location
    khartoum
    Posts
    19
    Rep Power
    0

    Thumbs up u9-3 (is exposure lamp&Ac driver pwb) also optical fuse

    check the above mentioned parts always the mentioned parts cause U9 codes check these parts also if they are ok use simlation mode To Reset as press hold zero button while powering on the mahine enter 20-3 then press 0 enter power off&on
    Quote Originally Posted by Dr. Mansour View Post
    I have cured the heater problem but don't know how to reset the u9 code.........any ideas?



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here