Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 31
This is older post but I said that I'll post some NVM settings for dc12/dccs50
759-053 set to 1
752-008 set to 1
799-004 set to 0 for dccs50 and 1 for dc12
-
Senior Tech
100+ Posts
- Rep Power
- 31
759-004 set to 0 for dccs50 and 1 for dc12
-
Uh! those cobras kick like a Cobra. Well first ther are to type first serial start with an M (software level 1.54 and 1.74)and have 5 leds on the side ,the second type start with G (software level 3.0 and 3.2)and have 6 leds on the side . Be carefull software CD are not interchangable you can kill the motherboard so verify you have the right software for the right serial our you may be in trouble. By the way have and oldy cd rom in hand most of the problem installing software are the cd rom readers dead or faulty is my experience just in case.
Hope this help.
Wiwa 72
Gonzos build v.1.0
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks