Results 1 to 2 of 2
  1. #1
    Technician
    Join Date
    Dec 2009
    Posts
    19
    Post Thanks / Like
    Rep Power
    11

    550i paper being crimped

    Hi I am very new to this board, I have a FX 550i that is both printing and coping but there are two marks coming through on the pages, one is a half moon shape that is repeating regular across page as if a roller is marking the paper. its Very visable on a fully black page but you can also see the light crimp marks on a white printed page....

    I have swapped out the toner and drums from another good unit but fault stays, I have another couple of 550is i can use as parts but I am a bit lost as to where the crimp is taking place, the half moons are about 15mm high and the spacing between is about 80mm.

    Any assistance would be appreciated.

    cheers P


  2. #2
    Technician
    Join Date
    Dec 2009
    Posts
    19
    Post Thanks / Like
    Rep Power
    11

    ok

    ok now i feel like an idiot, was the fuser unit, so happens the one I was swapping out with for comparison had the same breakdowns....


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here