Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 30
550i paper being crimped
Hi I am very new to this board, I have a FX 550i that is both printing and coping but there are two marks coming through on the pages, one is a half moon shape that is repeating regular across page as if a roller is marking the paper. its Very visable on a fully black page but you can also see the light crimp marks on a white printed page....
I have swapped out the toner and drums from another good unit but fault stays, I have another couple of 550is i can use as parts but I am a bit lost as to where the crimp is taking place, the half moons are about 15mm high and the spacing between is about 80mm.
Any assistance would be appreciated.
cheers P
-
Technician
- Rep Power
- 30
ok
ok now i feel like an idiot, was the fuser unit, so happens the one I was swapping out with for comparison had the same breakdowns....
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks