Results 1 to 6 of 6
  1. #1
    Service Manager 100+ Posts
    Join Date
    Apr 2009
    Posts
    200
    Post Thanks / Like
    Rep Power
    13

    dcc320 imari error code 004-346

    IBT belt too long error code...i had replaced a whole ibt assy but code still persists and belt will tear after machine starts ...any solution?


  2. #2
    Technician
    Join Date
    Jul 2008
    Posts
    31
    Post Thanks / Like
    Rep Power
    12

    Smile

    either one of the developer not seated properly that will disrupt the rotation of ibt belt. or the ibt cleaner is clogged.


  3. #3
    Service Manager 250+ Posts ck1's Avatar
    Join Date
    Apr 2008
    Posts
    392
    Post Thanks / Like
    Rep Power
    0
    IBT Belt home fail too long. Try clean the sensor of IBT


  4. #4
    Service Manager 100+ Posts
    Join Date
    Apr 2009
    Posts
    200
    Post Thanks / Like
    Rep Power
    13
    problem solved due to developer not seated properly...thanks for reply


  5. #5
    Service Manager 250+ Posts ck1's Avatar
    Join Date
    Apr 2008
    Posts
    392
    Post Thanks / Like
    Rep Power
    0
    oh.... new information . thanks also...........


  6. #6
    Service Manager 100+ Posts
    Join Date
    Apr 2009
    Posts
    200
    Post Thanks / Like
    Rep Power
    13
    after this problem happen, i always do one more steps is each times replace developer make sure insert drum cartridge and confirm smooth ...if any stuck half way do not try turn on machine and reinstall developer assy again.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here