Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
250+ Posts
- Rep Power
- 33
dcc320 imari error code 004-346
IBT belt too long error code...i had replaced a whole ibt assy but code still persists and belt will tear after machine starts ...any solution?
-
Technician
- Rep Power
- 33
either one of the developer not seated properly that will disrupt the rotation of ibt belt. or the ibt cleaner is clogged.
-
Senior Tech
250+ Posts
- Rep Power
- 37
IBT Belt home fail too long. Try clean the sensor of IBT
-
Senior Tech
250+ Posts
- Rep Power
- 33
problem solved due to developer not seated properly...thanks for reply
-
Senior Tech
250+ Posts
- Rep Power
- 37
oh.... new information . thanks also...........
-
Senior Tech
250+ Posts
- Rep Power
- 33
after this problem happen, i always do one more steps is each times replace developer make sure insert drum cartridge and confirm smooth ...if any stuck half way do not try turn on machine and reinstall developer assy again.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks