Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 4 of 4 FirstFirst 1234
Results 31 to 40 of 40
  1. #31
    Trusted Tech 50+ Posts
    Join Date
    Apr 2010
    Location
    casablanca
    Posts
    64
    Rep Power
    0
    thank you xcopytech

    but whats the solutiiiiiiiiiiiiiion plz ???????

  2. #32
    Trusted Tech 50+ Posts
    Join Date
    Apr 2010
    Location
    casablanca
    Posts
    64
    Rep Power
    0
    I have one question is that the fiery c3535 same c3445 ????????????

    wcp c3535 and c4535 becausemy friend have the wcpc3535 fiery


    (sorry for my bad english ^ _* )

  3. #33
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,650
    Rep Power
    57
    try with new ccm nvm or ccm pwb.
    and if your friend have dc 3535, controller is not same.
    you can use controller from wcp 2128/2636/3545

  4. #34
    Trusted Tech 50+ Posts
    Join Date
    Apr 2010
    Location
    casablanca
    Posts
    64
    Rep Power
    0
    OK Thank you x copytech ^_*

  5. #35
    Technician
    Join Date
    Jun 2010
    Posts
    25
    Rep Power
    28
    where can you buy a CCM NVM PWB?

  6. #36
    Technician
    Join Date
    Jun 2010
    Posts
    25
    Rep Power
    28
    I am trying to connect the printer with alternateboot. The following error will be displayed. the printer starts up over and over again. c3545

    "
    LynxOS (x86) created Thu Apr 14 13:27:16 EDT 2005
    ***** DMA-enabled IDE disk driver *****
    Copyright 1993 Xerox Corporation Version ROM
    Running fsck on [/dev/hd0b], Please Wait ...
    (all sizes and block numbers in decimal)
    (block size is 2048)
    (file system is byte-swapped)
    (file system creation time is Sat Jul 17 17:12:53 2010)
    (file system contains 104832 blocks and 26208 inodes)
    checking used files
    checking for orphaned files
    making bit map free block list
    making free inode list
    99482 free blocks 25871 free inodes
    Filesystem Ok

    Running fsck on [/dev/hd0a], Please Wait ...
    Filesystem Ok

    Running fsck on [/dev/hd0e], Please Wait ...
    Filesystem Ok

    Running fsck on [/dev/hd0h], Please Wait ...
    Filesystem Ok

    Running fsck on [/dev/hd0f], Please Wait ...
    Filesystem Ok

    Running fsck on [/dev/hd0i], Please Wait ...
    Filesystem Ok

    Running fsck on [/dev/hd0j], Please Wait ...
    Filesystem Ok

    Running fsck on [/dev/hd0k], Please Wait ...
    Filesystem Ok

    rc.custom1 is allowing the pci_enet DLM to install the i82559 Enet Driver!
    Atlanta Board Detected... Installing ELT and NPLI(SMC) Drivers
    Begin cleanup...
    ...cleanup finished.
    drinstall -c ./smcDriver
    ./smcDriver installed on driver id 31
    generate ./smcInfo
    devinstall -c 31 ./smcInfo
    PCI Bus NPLI Driver
    npliDriver::Could not allocate device space
    devinstall: ./smcInfo: Device or address doesn't exist
    Failed to install ./smcInfo



    **** LynxOS is down ****

    "
    what does NPLI driver do?

  7. #37
    Technician
    Join Date
    Jun 2010
    Posts
    25
    Rep Power
    28
    nobody installs new boot software?

  8. #38
    Technician
    Join Date
    Jun 2010
    Posts
    25
    Rep Power
    28
    Quote Originally Posted by rabib View Post
    Attachment 4109


    Thanks xcopytech

    but same problem

    Attachment 4107
    Change the C to a S

    map: C0_01_04.511 => S0_01_04.511
    file ecnC0304510.140 => ecnS0304510.140
    file in the upgrade map: ecnC0304510.dlm => ecnS0304510.dlm

    can anyone tell me why it is a C ?

  9. #39
    Technician
    Join Date
    Jun 2010
    Posts
    25
    Rep Power
    28
    This is not true. With the zipfile c0_01_04.511 you can update the ESSplatform and UIplatform to version 511/510.
    For the DCplatform ( System Software Version) you need another file.

    My software is still 01.04.044 does anybody got an upgradefile?

    Should be something like: C3545/inst/S0_01_04_505/

  10. #40
    Trusted Tech 50+ Posts seximibabay07's Avatar
    Join Date
    Mar 2013
    Location
    Luanda
    Posts
    59
    Rep Power
    23

    Re: workcentre pro c3545 help PLZ

    Hello friend, do you have FIRMWARE and WPS Diagnostics tool for WorkCentre Pro C2128?
    Best regards;

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here