Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    pal.xerox
    Guest

    WC5755 Edoc required

    Hi,
    i am facing code in 5755 10-360 & 03-480 . i don't know how to remove it becuase i don;t have service manual. can any one help me or send service manual ?

    reg
    Pal.xerox@gmail.com


  2. #2
    Senior Tech 100+ Posts tech9's Avatar
    Join Date
    Apr 2009
    Location
    london
    Posts
    218
    Rep Power
    20
    10-360 Fuser temperature sensor B reading is greater than the normal operating temperature similar to 56xxxx i would change the lvps, failing that order an fuser.
    I had the same fault on a 56xxx last week and it was the lvps.
    First try an nvm all copier initialisation.
    Fuser 65-90 ppm XE 109r00772 LVPS = 105k36410
    " 35-55 ppm XE 109r00751 LVPS = 105k35814


    03-480 IOT +24V Supply Failure RAP




    03-480 The IOT has detected a +24V supply fault.




    Measure the voltage from F1 fuse on the IOT PWB to the machine frame. The F1 is a small white fuse under PJ27 on the IOT PWB. If the voltage is less than +24V, install a new LVPS,


  3. #3
    pal.xerox
    Guest
    Thanks tech 9.
    i'll check tommorow lvps as you instructed. can you please send system software cd or just system software for this model ?
    please also need u r help about pws diagnostic tools.
    pal.xerox@gmail.com

    waiting your reply

    Quote Originally Posted by tech9 View Post
    10-360 Fuser temperature sensor B reading is greater than the normal operating temperature similar to 56xxxx i would change the lvps, failing that order an fuser.
    I had the same fault on a 56xxx last week and it was the lvps.
    First try an nvm all copier initialisation.
    Fuser 65-90 ppm XE 109r00772 LVPS = 105k36410
    " 35-55 ppm XE 109r00751 LVPS = 105k35814


    03-480 IOT +24V Supply Failure RAP




    03-480 The IOT has detected a +24V supply fault.




    Measure the voltage from F1 fuse on the IOT PWB to the machine frame. The F1 is a small white fuse under PJ27 on the IOT PWB. If the voltage is less than +24V, install a new LVPS,



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here