Workcentre pro 40C - WCP 40C - communication problem encountered

georgecollins · 08-05-2011

The PWS software I do not have. This is what I mentioned. The Xerox may be corrupt, but without the PWS software I can not see that corruption, in LynxOS I would be able to see the corruption very easy. This is why I asked if there was a standard login. I have 30 years in real unix, lynxOS and linux in my world are all considered baby unix. Pretty easy to work with.

Where can I get this illusive PWS software that runs on XP? That seems to be the bridge that everyone uses. If I could get in to the LynxOS I would just build a new GUI front end for access. This should only be a few minute job, I agree with you, not a big problem, but not having the PWS software or a login makes it a big job. I see the file systems are 40 but LynxOS has made them priority for some strange reason. I use C2 level for security on my systems, I think they just changed the node table to make it extra work.

So, I understand there are two pieces of software, PWS and Diag.exe. Is that correct and where are they downloaded from?
Thanks,
George

**azehnali** · 08-05-2011

I bought mine
I think you can find pws somewhere online for fre but the diagnostic software and machine software I dont think you can get that for free
yuo also need to know how to navigate the software also

yourri · 11-07-2011

hello all

I have the same problem of you bat in xerox workcentre pro c3545 :"communication probleme encountred ..."
the problem, i don't have soft "WCPS diagnostics"
pleaaaase can you send me a link to download the soft. or by e-mail: yourri.ma@yahoo.fr
Thank you in advance