Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1
    Senior Tech 250+ Posts delosangeles's Avatar
    Join Date
    May 2008
    Posts
    266
    Rep Power
    35

    Xerox WC 7132 with error code 089-311

    Hello everyone

    I have a client with a Xerox WorkCentre 7132 full color copier that displays on power up error code 089-311 I am Ricoh tech so the newer Xerox models are bit of a challenge for us. I would be grateful for any help with a discription of the code and if there is a way to clear it. I don't know how to enter the service modes so I could use your help or if a part would need to be replaced.

    Thanks everyone
    Trade like a tiger sleep like a baby

  2. #2
    Service Manager 5,000+ Posts
    Xerox WC 7132 with error code 089-311


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153
    This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals

    I'm always looking to trade too.

    Paul@justmanuals.com

  3. #3
    Senior Tech 100+ Posts tech9's Avatar
    Join Date
    Apr 2009
    Location
    london
    Posts
    219
    Rep Power
    33
    The problem is the ibt belt sensor is not reading the silver patches on the edge of the ibt belt. They are either scratched or the sensor is dirty or faulty. Replace patches and clean or replace ibt belt sensor. This normally works for me.

  4. #4
    Senior Tech 250+ Posts delosangeles's Avatar
    Join Date
    May 2008
    Posts
    266
    Rep Power
    35

    Cool

    Quote Originally Posted by tech9 View Post
    The problem is the ibt belt sensor is not reading the silver patches on the edge of the ibt belt. They are either scratched or the sensor is dirty or faulty. Replace patches and clean or replace ibt belt sensor. This normally works for me.
    Tech9 thanks for that info it's appreciated.
    Trade like a tiger sleep like a baby

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Sep 2010
    Posts
    76
    Rep Power
    28
    ibt belt part number if needed 064K92332

  6. #6
    Senior Tech 250+ Posts delosangeles's Avatar
    Join Date
    May 2008
    Posts
    266
    Rep Power
    35

    Cool

    Cool, Thanks for that info.


    Quote Originally Posted by MrXerox View Post
    ibt belt part number if needed 064K92332
    Trade like a tiger sleep like a baby

  7. #7
    eltonmaster
    Guest
    hello, do not know if you've solved the problem of error 089-311, mais'tem a solution without buying a new belt, is the following, you have to open the front cover of the machine takes all the accessories, such as the photoreceptor , blade cleaning, everything, and then dismantle the whole front just after the fuser strip, and remove the belt, there will appear a few sensors, and wipe them with cotton cloth or sensitive, and then assemble everything back and turn, almost sure it works,.

  8. #8
    Senior Tech 250+ Posts delosangeles's Avatar
    Join Date
    May 2008
    Posts
    266
    Rep Power
    35

    Really

    Quote Originally Posted by eltonmaster View Post
    hello, do not know if you've solved the problem of error 089-311, mais'tem a solution without buying a new belt, is the following, you have to open the front cover of the machine takes all the accessories, such as the photoreceptor , blade cleaning, everything, and then dismantle the whole front just after the fuser strip, and remove the belt, there will appear a few sensors, and wipe them with cotton cloth or sensitive, and then assemble everything back and turn, almost sure it works,.
    Really. I'll try that out. Thanks very much for that info.
    Trade like a tiger sleep like a baby

  9. #9
    dexters
    Guest

    7132 Error code 89-311

    I have the solution. Just remove the IBT belt and clean the home position sensors & the silver patch.
    That's it

  10. #10
    Senior Tech 250+ Posts delosangeles's Avatar
    Join Date
    May 2008
    Posts
    266
    Rep Power
    35

    Cool

    Quote Originally Posted by dexters View Post
    I have the solution. Just remove the IBT belt and clean the home position sensors & the silver patch.
    That's it
    Cool, thanks for that info.
    Trade like a tiger sleep like a baby

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here