Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Sep 2010
    Posts
    63
    Rep Power
    28

    Xerox WC Pro 245 - OF3 Dead Machine RAP

    Xerox WorkCentre Pro 245:

    You can power it on, the lights to the right of the display will come on, then everything shuts off.

    Service manual says: "Go to the OF3 Dead Machine RAP"


    OF3 Dead Machine RAP does not exist. I cannot find it anywhere.

    Can anyone shed any light on this?

  2. #2
    Senior Tech 250+ Posts xeroxsharp's Avatar
    Join Date
    Nov 2008
    Location
    LJUBLJANA
    Posts
    272
    Rep Power
    35
    UI PWB,LVPS

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Sep 2010
    Posts
    63
    Rep Power
    28
    Quote Originally Posted by xeroxsharp View Post
    UI PWB,LVPS
    We already replaced both of those and the issue is still occurring. Thanks for your input, though.

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Feb 2009
    Location
    Rogers, Arkansas
    Posts
    466
    Rep Power
    35
    Make sure the hard drive in the controller is connected ( data and power ).

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Dec 2007
    Posts
    111
    Rep Power
    35
    try replacing NVM module or upload MBR nvm

  6. #6
    Agitating Artificer 250+ Posts CopierTechofOmens's Avatar
    Join Date
    Jan 2009
    Location
    NY
    Posts
    269
    Rep Power
    35
    I would run through the 01J RAP.

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Sep 2010
    Posts
    63
    Rep Power
    28
    Well the tech never got back to me about this so I'm not sure if anything worked. Thanks for the help everyone!

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Nov 2010
    Location
    Ro
    Posts
    51
    Rep Power
    28
    Normaly is a LVPS problem, but if you replace LVPS and the problem still there then you have to replace HVPS also and verify UI PWB (can make your hell life...). When is NVM the machine is booting but with speed/drum/fuser error. Then you need to replace battery and reload NVM.
    Good luck!
    "Opportunity is missed by most people because it is dressed in overalls and looks like work. "

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Sep 2010
    Posts
    63
    Rep Power
    28
    Quote Originally Posted by amadeusmbi View Post
    Normaly is a LVPS problem, but if you replace LVPS and the problem still there then you have to replace HVPS also and verify UI PWB (can make your hell life...). When is NVM the machine is booting but with speed/drum/fuser error. Then you need to replace battery and reload NVM.
    Good luck!

    Thanks!!

  10. #10
    arjun
    Guest

    Re: Xerox WC Pro 245 - OF3 Dead Machine RAP

    Quote Originally Posted by dinkyoaf View Post
    Xerox WorkCentre Pro 245:

    You can power it on, the lights to the right of the display will come on, then everything shuts off.

    Service manual says: "Go to the OF3 Dead Machine RAP"


    OF3 Dead Machine RAP does not exist. I cannot find it anywhere.

    Can anyone shed any light on this?
    Hi , I having same issue with my XEROX WC Pro 245 from today morning , while booting i heard little sound like "thud" and then it went down, after switching on again , Green led's beside LCD comes up and within 10 seconds complete machine shuts down.I doubt some fuse may have been blown.Please let me know where can i check for fuses..?
    Kindly help me with service manual.

    Thanks in Advance.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here