Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 31
hello,Jimmy B.did u ever resolve your xerox dc12 power issue?
-
Trusted Tech
50+ Posts
- Rep Power
- 33
The problem was in Control panel module.
look in SM for: Power Save and LED RAP
This RAP is used to repair failures in the Power Save and LED Circuit.
.
.
.
Preform the following:
•Go to Flag 1 on BSD 2.3 and check for a short circuit
•Go to +5 VDC Power (IOT LVPS) RAP
Perform the following:
•Go to Flag 2 on BSD 2.3, and check for an open circuit.
•Replace the Control Panel (PL 9.2).
•Replace the IOT CPU PWB (PL 9.2).
•Replace the IOT Drive PWB (PL 9.2).
•Replace the IOT LVPS (PL 9.3).
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks