Does anyone have any documentation on this machine. Manuals justmanuals doesn't seem to have anything. Having a few issues with one I told a customer I'd look at.
Does anyone have any documentation on this machine. Manuals justmanuals doesn't seem to have anything. Having a few issues with one I told a customer I'd look at.
If you mean wcp 65 Lakes family, I have Edoc, could upload for you. Do you have PWS?
Thanks but no I don't.
Does a 5665 come close?
That's the only version I have.
What's your problem? Maybe someone could help if you post that issues.
Yeah I getting turn power on and off repeatedly
with codes:
9.370.00
14.300.00
7.202.03
12.232.00
Any help would be much appreciated.
I can list error codes from documentation:
Fault Code, 09-370, indicates that the Transfer HVPS fuse is open or that the power supply is on in standby. The Transfer Fault Monitor signal is High when the Transfer Enable should be Low.
14-300
The control system did not detect a signal at the AGC patch, which indicates the Illumination Lamp is not lit or there is a failure in the video path. Scanning is disabled with this fault.
Probably video cable.
07-202
The Stack Height Sensor senses the Paper Tray is not in the feed position after the Tray Elevator Motor has been on for 7 seconds.
Ensure the Stack Height Sensor actuator flag on the rear of the paper tray is seated correctly and moves freely without binding. If the actuator is broken or missing, replace the Paper Tray
Thanks for your help. I'll start with the LVPS.
This site has PWS is just download and install, this file already has the documentation of some machines colored Xerox PWS Collection 1 (download torrent) - TPB
Bookmarks