on connecting DC3535 with computer network controller down message comes. can anyone help
on connecting DC3535 with computer network controller down message comes. can anyone help
need more info like is your machine booting up normally , does it take longer time at any particular dot's? are you able to ping the dc3535
a machine is only as good as your tech : source:screwtape ; the scary one
no i m not able to ping dc3535
I think I can help...we have this machine....Once the machine fully boots up then press the key button on the conttrol panel, enter passcode, then go tot system settings, then go to system settings again, then go to network settings, then go to set all of your ip numbers etc....exit out of there fully, the machine will re-bot....then try to ping it....you can call me if you want...704-333-3977 ask for David
you need to reinstall your fiery software.
a machine is only as good as your tech : source:screwtape ; the scary one
Is the controller on DHCP or manual IP mode? can you connect on controller with Workstation?
It is on manual IP mode. No i it is not connecting with workstation. When we start machine on 4th dot it takes 4 to 6 minute to boots. on going to system setting protocol set in not active
How reinstall fiery software. I had Pws 3.6 and CWS 4.0
you need the fiery software cd. Is this a bustled EFI Controller or a standalone EFI Fiery?
Bookmarks