Phaser 7750 Says "Warming up, Please Wait"

[travi]

Upon power up the machine will go thru the splash screen. Then it will say "Warming Up, Please Wait". It will not get past this screen. I cannot find anything in the service manual about this problem.
Thanks Travis

[juan contreras]

Upon power up the machine will go thru the splash screen. Then it will say "Warming Up, Please Wait". It will not get past this screen. I cannot find anything in the service manual about this problem.
Thanks Travis

Hello travis are you ready whit the phaser problem?

this es my e-mail jpc.delacruz79@hotmail.com

write to me please !

[maich4s]

hello,
when you switch on the machine please not the light indicator changes,im suspecting a corrupt or missing system software.open the back side and see if the hard disk is there.
please let me know if it has been working before.

[mrvica]

I have similiar problem on xerox 5790. In my case after few minutes of warming I press stand by than and touch screen and it worked for me.

hello,
when you switch on the machine please not the light indicator changes,im suspecting a corrupt or missing system software.open the back side and see if the hard disk is there.
please let me know if it has been working before.