just got belt off, no problem. Now when rebooting my touch screen does not seem to work
Thanks: 0
Likes: 0
Dislikes: 0
just got belt off, no problem. Now when rebooting my touch screen does not seem to work
Last edited by timmedley; 02-13-2011 at 06:06 PM. Reason: newest update
Also, when replacing IBT belt, does position of silver tape square matter? ( got belt off jayc67. Thanks much. I am starting to think about buying a new assembly.
You're welcome timmedley! the silver patch on IBT belt has to be very clean, and opposite of the detector on the IBT belt assembly. When you change the belt, it tooks the right place when you restart the machine (is it your question's answer?).
After cleaning the assembly, do you need to reset the NVM? This is on a Xerox DC700.Originally Posted by jayc67
Thank you so much for your help.
No, you don't have to reset anything
Thanks for your help, jayc. We are seeing the same fault code (042-326) on a DC700. Does this procedure also apply?
I think so, i don't know the DC700 but the description is the same, so i think it's the same procedure. Do you already change the Belt?
Reply With Quote
Bookmarks