Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 0
xerox so hard up? Copycenter 245
Xerox is always been so proprietary and all we are doing is trying to make a living. Why is it so difficult to ba able to resolve a"install phase incomplete" code?
-
Senior Tech
100+ Posts
- Rep Power
- 33
The only way around this is a PWS and reload MRD, if you do not have this then you will need to get an already programmed NVM Software module. You could try this as well
1. Enter diagnostics
2. Enter DC131 (NVM Read/Write)
3. Enter 03 Machine Run Control and change the following locations.
set 3-005 (System Install Phase) to 4 (Install Complete)
set 3-018 (DC Install Phase) to 4 (Install Complete)
May work or not.
-
Trusted Tech
50+ Posts
- Rep Power
- 0
-
Senior Tech
250+ Posts
- Rep Power
- 33
Re: xerox so hard up? Copycenter 245
I have the same problem, but I have not yet solved. Some help? I have all programs of pws
-
Senior Tech
250+ Posts
- Rep Power
- 33
Re: xerox so hard up? Copycenter 245
Any help? I have a xerox 5645
-
Technician
- Rep Power
- 28
Re: xerox so hard up? Copycenter 245
Excellent JOB Tahnk You.
It works on WC 5638.
Many thanks for "tech9"
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks