hello all the tech
after cleaned xerox centre C118 , she make :J4-1000
check check Consumable
replace the print cartridge
any help!
hello all the tech
after cleaned xerox centre C118 , she make :J4-1000
check check Consumable
replace the print cartridge
any help!
A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!
DAMENE ABDEL AZIZ
DJELFA
well ...that means : J4-1000 PAR Falher do ATC Sensor....c un problème de capture ATC situer a l'unité d’image...vérifier le ...
BEST TECHNICIAN . NICE PEOPLE .
thank you very much dear friend zaza
i'll check it and i reply
A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!
DAMENE ABDEL AZIZ
DJELFA
i checked all the part But No result!!!!
A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!
DAMENE ABDEL AZIZ
DJELFA
well check the image unity and open all parts of this unity section ..controlled and view the place of captor and chip ...maybe you forget any parts ...good luck
BEST TECHNICIAN . NICE PEOPLE .
Nothing there is another solution !!
A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!
DAMENE ABDEL AZIZ
DJELFA
there is another solution!
A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!
DAMENE ABDEL AZIZ
DJELFA
can any one Help me!!!!!!!!!!!!!
A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!
DAMENE ABDEL AZIZ
DJELFA
Hi,
Do you check the wiring and continuty between xero/developer module conector and MCU PWB.
There are simply conection between MCU & ATC sensor.I think there is open circute.
i checked all parts But no result
is Not the ship !?
A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!
DAMENE ABDEL AZIZ
DJELFA
Bookmarks