hello,
my 7675don't used.It's display "reset the machine ,UI/NC Interface Cable failure has occurred"..
Can you help me ? Thank you very march. and I have not service manual..
email: yowang@263.net
hello,
my 7675don't used.It's display "reset the machine ,UI/NC Interface Cable failure has occurred"..
Can you help me ? Thank you very march. and I have not service manual..
email: yowang@263.net
Turn off machine for 3-4 min, and power on.
have u managed to sort out the workcentre error
hello Maich4s,
how to sort out the workcentre error,can you tell me ?
thanks !
Turn off machine for 3-4 min, and power on don't sort out.
hello,i also had that problem with a wc7665 and the only way out was to reload software on the network controller,for this you need to have a pws.can you get access to apws????
from what country are u in?and for how long has the machine been idle or down without printing.also let know what is the version of your software its normally displayed on the screen when machine starts up.starts with either 042 or 043
It's 040.033.53050. Display UI/NC interface cable failure has occurred when power on.
Bookmarks