Thanks:
0
Likes:
0
Dislikes:
0
-
Office Copier Rentals
- Rep Power
- 27
Xerox workcentre pro 55 (gets stuck on 75% when network booting up)
When machine is booting up, on the display it go's 25% -50% but it stays stuck on 75% printing network... any help will be appreciated.
-
Senior Tech
250+ Posts
- Rep Power
- 35
Need to reload network firmware
-
Office Copier Rentals
- Rep Power
- 27
Wow, how can I get a hold of the firmware? I would need install instructions as well?
-
I think you need PWS for software reload
-
Service Manager
250+ Posts
- Rep Power
- 32
Need a pws. Call a xerox tech
-
Senior Tech
250+ Posts
- Rep Power
- 35
Yes you need a PWS to install
-
Trusted Tech
50+ Posts
- Rep Power
- 28
try taking a small flathead screw driver and pull out the ess and press in all connections in the rear of the ess board. from factory some come loose. other that that if you have a spare lvps i would try swapping that to rule it out.
-
Junior Member
- Rep Power
- 0
Re: Xerox workcentre pro 55 (gets stuck on 75% when network booting up)
I have the same issue and iam a novice so what is PWS and what is ESS??
and how can i get the software needed to reinstall and how do i do it please help me ASAP
Sent from my Lenovo A7010a48 using Tapatalk
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks