Thanks:
0
Likes:
0
Dislikes:
0
-
5675 Can't Upgrade Firmware
When we try to upgrade the firmware level for the client it either says "failed" or it says "this software is not for this machine". Any ideas? Toasted HDD?
Machine works fine other than we can't add more than 2 email addresses on the public address book.
Thanks
Kelly
-
What version of sw have you on machine ?
What level sw will be put on ?
-
It has 21.113, can't get it to go up from there or even reload current level. Very strange. The reason we want to reload/upgrade is that the csv for email addresses won't upload more than 2 names and it always says it failed from the Centreware screen.
Any ideas?
Kelly
-
All machine have 21.113. I want the correct level of sw like 21.113.xx.xxx
-
Senior Tech
100+ Posts
- Rep Power
- 33
-
Firmware is 21.113.02.000.
What are you referring to tech9 on "altboot" ?
Thank you all!
Kelly
-
Senior Tech
100+ Posts
- Rep Power
- 35
It's dufferent method to upgrade reload NC software .
You have to have GSN and PWS tools
-
Yes you may do an altboot. The last version of firmware is 21.113.02.091
This version of firmware has many improvements.
-
Technician
- Rep Power
- 0
I'm trying to do an ESS software load thru Altboot, but when I try open the altboot application - It says "Connection fail!" Do i need to reload altboot? or what do i need?
-
Look for COM. Number one is the best.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks