Does anyone know what it is the needs to be reset on the transfer belt for a 6180? Is is a chip or a fuse? Seems a shame to fill the dumpsters with these things when the quality is fine.
Thanks all!
Kelly
Does anyone know what it is the needs to be reset on the transfer belt for a 6180? Is is a chip or a fuse? Seems a shame to fill the dumpsters with these things when the quality is fine.
Thanks all!
Kelly
I bought a used belt because I dropped a cart on my existing one and punched a hole in it. The used one immediately said "REPLACE", so guess I was bilked. So I took the 4 Philips screws from the damaged one and found a small circuit board removeable, so took it out to save for later. So when the used replacement dies completely I plan to replace the board with the one I scavenged...wish me luck.
Not sure myself (Might be a Pico fuse).
But here is the replacement board from item inc. 675K47088-CHIP
Good luck
This looks just like the one I took out! I see it here for $35 (chip is on the bottom).... 675K47088-CHIP - Xerox 6180 Transfer Belt Chip Item Inc.
while you have it apart make sure you completely clean out waste toner box. tuey
it's the chip only, if you change and dont clean waste box it will shortly oveflow with no message and make a nice mess. i know from experience.
Bookmarks