Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 32
xerox 510 lines
Need some help working on a xerox 510 that has straight black thin lines some are faint others are dark.
Replace Drum, Cleaning kit, tranfer roll still have problem. Any help!!
-
Senior Tech
100+ Posts
- Rep Power
- 28
Re: xerox 510 lines
First, are the lines running through the length of the print going in the process direction? Typically, lines on the 510 are caused by the scorotron. This is particularly true if the lines come and go, or move around from side to side from one print to another. When cleaning the pin array, never use a towel as lint from the towel only makes the problem worse. Instead, try a brush, or simply wipe the blade along its length with your fingers. Look or feel to make sure none of the tips of the pins are bent. If bent, lay the pin array on a flat surface and using the top of your finger nail, press them flat sliding your nail towards the tip of the pin.
-
Senior Tech
100+ Posts
- Rep Power
- 32
Re: xerox 510 lines
Thanks technogeek,
I read your tread after the damage is was done to scrotron and place a order for a new one.
-
Senior Tech
100+ Posts
- Rep Power
- 28
Re: xerox 510 lines
For future reference, talk to me about part for Xerox wide format. I can save you a bundle. Let me know if I can help with the technical problems as well! cbyrne@goevergreen.net
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks