Hi everybody,
I have a little problem with WorkCentre 5645 copier only.
See attachment file to view Fault History Report.
The error codes are:
03-350 The IOT has detected no response from the tray 1 and 2 control PWB to the ping request.
03-315 The image processing PWB has performed a crash recovery procedure.
03-300 The image processing PWB to IOT communications have failed.
08-151 The trail edge of the paper was late to the registration sensor after the registration clutch, CL08-070 on.
03-371 The fuser CRUM communications have failed.
03-372 The xerographics CRUM communications have failed.
This is a very strange problem.
Todey a was made only few copies from tray 1 (A4SEF), tray 3 and tray 4 (A4LEF).
I have paper jam at area 1, 3 and 4.
Any supposition?
Thank you.
Bookmarks