Thanks:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 0
DC6060 software upgrade required
Dear All,
i am facing problem in dc fault code 6-390 as per manual and eurika tips fault is cpu pwb software installation required. i need parallel port adaptor to upgrade software for parellal cable. can any one help me i need this tool i will pay for tool or can exchange xerox stuff.
Reg,
kt
-
Re: DC6060 software upgrade required
In other words you want to reload the IOT software and you need driver for lpt1
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: DC6060 software upgrade required
yes i want to reload iot software but i required parallel port adaptor which is must required to reload software and it will connect with parallel cable.
kt
-
Senior Tech
250+ Posts
- Rep Power
- 35
Re: DC6060 software upgrade required
You should be able to use a USB to Parallel adapter.
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: DC6060 software upgrade required
Dear Milo,
yes i can use usb to parllel but what about parellel adaptor ?
please see the bellow note it is in software reload instructions.
CAUTION:
Before starting the Download, ensure that the parallel port adapter tool is connected and the parallel and serial
cables are properly connected to the PWS and PWB.
can you explain this there is also tool part# availbe in installation instructions notes.
Procedure
CAUTION
The parallel cable must be connected or PWB failure can occur
during the download.
1. Connect the parallel and serial cables between the PWS and the
machine. The Parallel Port Adapter Tool (600T2262) must be
connected between the Parallel cable and the PWS or System
PWB failures will occur.
2. Plug the PWS into an AC power source to prevent a loss of
battery power during the software download.
-
Senior Tech
250+ Posts
- Rep Power
- 35
Re: DC6060 software upgrade required
As far as i know the "parallel adapter tool" is the parallel cable. It may be talking about a USB to parallel interface because many xerox PWSs don't have parallel ports anymore. You can pick up a USB to parallel cable and driver disk from Radio Shack or any other electronics store...ie Fry's electronics.
I haven't used the USB to parallel but have used the USB to serial, my laptop has a parallel port on the back.
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: DC6060 software upgrade required
you can see in my post there is clearly mentioned '' The Parallel Port Adapter Tool (600T2262) must be
connected between the Parallel cable and the PWS or System
PWB failures will occur''
i have both ports serial and parllel in my dell610 laptop but confused now after read above instructions.
-
Senior Tech
250+ Posts
- Rep Power
- 35
Re: DC6060 software upgrade required
There isn't any adapter. Just use the parallel cable.
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: DC6060 software upgrade required
ok thanks milo i'll try tommorow.
-
Re: DC6060 software upgrade required
Just plug those cables into laptop and machine. Xerox likes to give their names to common stuff.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks