Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Oct 2011
    Location
    Khartoum, Khartoum
    Posts
    2
    Rep Power
    0

    Xerox 5252 error code list

    I have error code 003-379 on my xerox 5252 and 010-367.
    Can anyone help me please?
    Is it possible to error code list for this model?

    Thanks


  2. #2
    Service Manager 100+ Posts
    Join Date
    Jul 2008
    Location
    Kampala, Central
    Posts
    211
    Rep Power
    22

    Re: Xerox 5252 error code list

    Quote Originally Posted by erdiwaz View Post
    I have error code 003-379 on my xerox 5252 and 010-367.
    Can anyone help me please?
    Is it possible to error code list for this model?

    Thanks
    I am assuming that the error codes for a 5252 are the same as for a 2060, someone please correct me if I'm wrong. If that's the case:

    3-379 Dongle Broken

    10-367 Heat Roll Overheat Fail

    Attached is a list of some (not all) error codes for the 2060

    Attached Files Attached Files

  3. #3
    Junior Member
    Join Date
    Oct 2011
    Location
    Khartoum, Khartoum
    Posts
    2
    Rep Power
    0

    Re: Xerox 5252 error code list

    Quote Originally Posted by GusG View Post
    I am assuming that the error codes for a 5252 are the same as for a 2060, someone please correct me if I'm wrong. If that's the case:

    3-379 Dongle Broken

    10-367 Heat Roll Overheat Fail

    Attached is a list of some (not all) error codes for the 2060

    Thanks a lot, I will check and tell if goes well.

    Thanks again...


  4. #4
    Junior Member
    Join Date
    Feb 2015
    Posts
    4
    Rep Power
    0

    Re: Xerox 5252 error code list

    Quote Originally Posted by erdiwaz View Post
    I have error code 003-379 on my xerox 5252 and 010-367.
    Can anyone help me please?
    Is it possible to error code list for this model?

    Thanks
    We also hawe same problem with 010-367 on dc5252.
    Did you hawe some solutions?
    How to reset error?
    Thanks


  5. #5
    Technician
    Join Date
    Jun 2014
    Location
    ATHENS
    Posts
    23
    Rep Power
    8

    Re: Xerox 5252 error code list

    Quote Originally Posted by iguano View Post
    We also hawe same problem with 010-367 on dc5252.
    Did you hawe some solutions?
    How to reset error?
    Thanks

    NVM location 744-016, Heat Roll Over Heat Fail 2 is reset to 0


  6. #6
    Senior Tech 100+ Posts
    Xerox 5252 error code list

    xtrain's Avatar
    Join Date
    Dec 2012
    Location
    Meridian Idaho
    Posts
    212
    Rep Power
    0

    Re: Xerox 5252 error code list

    Quote Originally Posted by erdiwaz View Post
    Thanks a lot, I will check and tell if goes well.

    Thanks again...
    Are you familiar with the dongle? It is a chip installed on the system PWB at location P646, and it determines the speed,45,52,60 prints per minute. It must match the IOT software, which in your case is 5252. To access the dongle, you must remove the system PWB, which is quite a job if you are not experienced on this product. The communication cable from the system PWB to the IOT PWB might be disconnected or damaged. Good luck.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here