Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Dec 2011
    Location
    Warsaw
    Posts
    29
    Rep Power
    25

    wc 5225a endless boot

    Hello,
    We have a dead xerox wc 5225a. Machine stucks at booting, the progress bar stuck in about 2cm.
    Machine can boot up in download mode, we've tried various firmwares. The firmware is downloaded but the problem continues.
    We tried "special boot modes" (all of them) - no progress. We swapped hdd and initialised it - didn't helped.

    Do you have any other suggestions than swapping ess pwb?
    Can ess pwb be swapped from 5225 to 5225a?

    Regards,
    Marcin

  2. #2
    Senior Tech 100+ Posts
    wc 5225a endless boot


    Join Date
    Oct 2010
    Location
    Walworth, NY
    Posts
    231
    Rep Power
    30

    Re: wc 5225a endless boot

    Quote Originally Posted by szanka View Post
    Hello,
    We have a dead xerox wc 5225a. Machine stucks at booting, the progress bar stuck in about 2cm.
    Machine can boot up in download mode, we've tried various firmwares. The firmware is downloaded but the problem continues.
    We tried "special boot modes" (all of them) - no progress. We swapped hdd and initialised it - didn't helped.

    Do you have any other suggestions than swapping ess pwb?
    Can ess pwb be swapped from 5225 to 5225a?

    Regards,
    Marcin
    Had a couple boxes do that -- changed the drum mod. Not sure about the ess pwb.

  3. #3
    Technician
    Join Date
    Dec 2011
    Location
    Warsaw
    Posts
    29
    Rep Power
    25

    Re: wc 5225a endless boot

    changing consumable deosn't help

    we switched nvram with another copier, machine booted up and serial number error has shown, so probably the nvram is corrupted.
    How can we fix it? Special boot with nvm recovery deosnt work...

  4. #4
    Service Manager 5,000+ Posts
    wc 5225a endless boot


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: wc 5225a endless boot

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  5. #5
    Senior Tech 100+ Posts tech9's Avatar
    Join Date
    Apr 2009
    Location
    london
    Posts
    219
    Rep Power
    33

    Re: wc 5225a endless boot

    you need to synchronise the pwbs

  6. #6
    SpareParts
    Guest

    Re: wc 5225a endless boot

    No you cannot use a base 5225 ess or a 5225P ess. The base and the P model are interchangable with each other but not with the A because theA is a totaly diffreent board because of the color scanning. I beleive the DDR is built in as well as the R2 on the color model. If you ever need to put the base in a P model you just have to add R1, R2 and the DDR memory. But if you want to use a P in a base you have to go in and delete all data to free it from thinking it still has these dimms.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here