I'm getting a lot of jams in or near the fuser with a 10-105 code and when that happens the paper isn't always in the fuser, sometimes it stops just before or just inside the fuser.
It never happens on the first print and when the machine is cold it jams less frequently, for instance it may do 50 300 gsm SRA3's when cold and only 6 when it's run for a while before i get a 10-105, I can do substantially more A4 bond 80 gsm but it will still jam at 100 or so prints. A workaround is to send the jobs in smaller quantities, i.e. if I have to do 100 prints I send it 20 times with 5 copies each time, it's a royal pain but it works and it's better than waiting 4 minutes for the machine to warm up every time I've cleared the fuser.
Any suggestions how I can get to the bottom of this will be highly appreciated.
Bookmarks