Hi, hoping that someone seen this problem before.
Working on a Xerox WC 5775 There are three sets of faults: 10320, 10380. I tried
another working fuser and the same problem. Any help appreciated.
Thanks.
mdm
Hi, hoping that someone seen this problem before.
Working on a Xerox WC 5775 There are three sets of faults: 10320, 10380. I tried
another working fuser and the same problem. Any help appreciated.
Thanks.
mdm
Bad LVPS or NVM corrupsion.
Thanks Xeroxsharp and Adriansto,
I am ordering a LVPS and IOT PWB to take care of problem, I will keep you all inform.
Adriansto, could give me a little more info on what to look out for on the fuser contacts.
Thanks.
10-380 error code mean reading differece between the two thermistors from fuser assy.
May be a bent contact(s) in fuser conector located in machine. You exclude the contacts connector on fuser assy because already tried two fusers assy and get same error.
Were you able to solve this problem? Could you please help me I have same problem.
Bookmarks